Our work

Recent spray painting projects

A selection of recent industrial, commercial and domestic jobs, with the preparation behind each finish and the coating systems we used.

Industrial

Industrial projects

Machinery, marine, rail and cladding work, where the coating system matters as much as the colour.

Webster & Bennett vertical boring machine in worn green paint, masked with tape and paper before spraying
Before
The same Webster & Bennett vertical boring machine resprayed light grey, with the worktable left as bare metal
After

Machinery & plant

Machine tool respray

A Webster & Bennett vertical boring machine with tired, worn green paint. The slideways, dials, controls and worktable were fully masked before the machine was resprayed in light grey.

Bare steel hull of a 20 metre river cruiser in a boat shed before coating
Before
The river cruiser after spraying, with white and cream topsides and a red hull below the waterline
After
Stern view of the finished river cruiser in gloss white with its superstructure still sheeted
After

Marine coatings

20 m steel river cruiser

This 20-metre river cruiser was bare steel. It was finished with a marine-standard system: an epoxy primer to protect against corrosion, a polyurethane topcoat and a silicone antifoul below the waterline.

Primer
Epoxy, for good adhesion and corrosion protection
Topcoat
Polyurethane, UV resistant with a long service life
Below the waterline
Silicone antifoul
Blue train cab end flatted, filled and masked in a depot, ready for spraying
During

Rail

Rail vehicle respray

Train cab ends are flatted, filled and masked before spraying. For trains we use Axalta hydro topcoat, chosen because it stands up to the conditions of a train in service and has anti-graffiti properties.

Topcoat
Axalta hydro topcoat: durable in service, anti-graffiti
Industrial unit masked and sheeted ready for cladding respraying, with a scissor lift on site
During

Cladding respraying

Industrial unit cladding respray

Large cladding areas are masked and sheeted, then sprayed from a scissor lift. On big areas we use a single-stage, air-drying epoxy for longevity and durability.

Coating
Single-stage air-drying epoxy, for longevity and durability

Commercial

Commercial projects

Roller shutters, containers and premises refreshed on site, with everything around the work masked and protected.

Sprayer in protective overalls respraying a red roller shutter dark grey, with the surrounding cladding masked
During

Shop fronts & roller shutters

Roller shutter respray

A red roller shutter on an industrial unit resprayed dark grey on site, with the surrounding cladding, side door and frame masked and sheeted.

During
Two shipping containers after respraying, one bright pink and one lime green
After

Containers & steelwork

Shipping container resprays

Two steel shipping containers resprayed on site in bright pink and lime green, with the ground sheeted to protect the paving and grass around them.

Domestic

Domestic projects

The same spray finish for homes: windows, doors and kitchens in any RAL colour.

Detached house with white uPVC windows being masked for spraying, with a scaffold tower and the P.J. Coatings van
Before
The same house after its uPVC windows were resprayed anthracite grey
After

Windows, doors & uPVC

uPVC window respray

White uPVC windows on a detached house resprayed anthracite grey, with each window masked and sheeted before spraying.

Oak shaker-style kitchen with a cream range cooker, before respraying
Before
The same shaker kitchen resprayed light grey, with the range cooker fronts sprayed gloss black
After

Kitchen respraying

Oak kitchen respray

Oak shaker kitchen doors, drawer fronts and end panels resprayed light grey. The cream range cooker’s fronts were taken off and sprayed gloss black.

Ready to transform your premises?

Tell us about your project and we'll get back to you with a quote. Based in Rotherham, working across Sheffield, Doncaster, Barnsley and nationwide.

07751 045 140